Nippon EA4 Finish
Heavy Duty
Product Information
Nippon Paint EA4 Finish is a two-pack amine-adduct cured epoxy finish for use on steel and cement surfaces where chemical, oil and abrasion resistant coating are required. It is recommended for non-immersion services. If it is to be applied over steel, it has to be used in combination with the appropriate primers as recommended below. If it is to be applied over concrete the surface should be acid-treated prior to application.
Recommended Surfaces
- Properly primed steel.
- Masonry.
- Tile.
Technical Sheet (KH)
Technical Sheet (EN)
Nippon Catalog
- Good resistance to abrasion and mechanical damage.
- Excellent on correctly prepared surfaces.
- Dry service temperature ranges up to 100°C.
| Finish | High Gloss |
|---|---|
| Theoretical Coverage | 10.2 m² / litre (for dry film thickness of 50 microns) 6.4 m² / litre (for dry film thickness of 80 microns) |
| Practical Coverage | 6.1 m² / litre (for dry film thickness of 50 microns) 3.8 m² / litre (for dry film thickness of 80 microns) |
| Typical Thickness | 50 - 80 microns DFT μm dry film per coat 100 - 160 μm wet film per coat |
| Packing | 1L, 5L, 20L |